High Torque Gearmotors

The AmpFlow HR-12-G150 gearmotor packs a whopping 150:1 speed reducer into a compact space that is just a fraction of the size this high reduction ratio would normally occupy.

The planetary reducer (actually a "split ring compound planetary epicyclic reducer") combined with the powerful 12-volt motor produces tremendous torque at a speed of just 30 RPM.

The one-inch diameter output shaft is supported by two big 2-inch ball bearings. The shaft features a 1/4-inch key and a snap ring.

Mount this motor using the four threaded mounting holes on the face or the two holes on the underside.

The gearmotor measures 8 inches long (not including shaft) x 4 inches wide x 4 inches high. It weighs 9.4 pounds.

Specifications:

Operating voltage: 12 Volts
Shaft diameter: One inch
No-load speed: 30 RPM
Torque at 30A: 65 foot-pounds
Torque at 60A: 150 foot-pounds
Stall torque at 120A: 320 foot-pounds
Duty cycle at 60A: Two minutes
Dimensions: 8 inches long x 4 inches wide x 4 inches high
Weight: 9.4 pounds.

AmpFlow HR-12-G150 Gearmotor - $249

Quantity

Warranty

The gearmotors are warranted to be free from manufacturing defects and fully operational when you receive them. AmpFlow gives no other warranty, either expressed or implied. Warranties are not transferable. In no event shall AmpFlow's liability exceed the buyer's purchase price, nor shall AmpFlow be liable for any indirect or consequential damages.

We accept Visa, MasterCard, and PayPal.